Fixing the 2.72 8M Issues
I compiled up the Wildcat version with your changes and it seems to run fine on my 2MB version including file saving loading using the standard unmodified 2MB sys.I can't check it on my relative's 8MB...
View ArticleClik here to view.
Fixing the 2.72 8M Issues
OK try this oneThe modified SYS has support for handling an extra prescale control ANALOG_PSC in the bios. Wildcat sticks with the fixed prescale of the standard SYS and I don't find that a real...
View ArticleFixing the 2.72 8M Issues
bobtidey: Is the SYS 1.6 you provided the one modified for the community application? If so, I can't find the modified table or any additional functions. It is very similar to the current "factory" SYS...
View ArticleClik here to view.
Fixing the 2.72 8M Issues
The standard community app uses a modified SYS (25116) whose main difference is to use a different table of multipliers in generating the frequencies of the sig gen. Without the modified SYS then the...
View ArticleFixing the 2.72 8M Issues
I suspect the issues have more to do with the modified SYS, but I have not been able to find out what it does or locate the source code. If anyone has a link, please post it or update it based on the...
View ArticleFixing the 2.72 8M Issues
That sounds very encouraging. I'll try that out and if I get a chance try out the equivalent change in the Wildcat version I normally use. My test would be on a 2Mb system but I have a relative who ha...
View ArticleFixing the 2.72 8M Issues
Issues found thus far:* On chan 4 menu, moving past "Meter" crashes. doubt this has to do with file I/O* Freq generator / display is off, this is probably due to known dependence on customized SYS*...
View ArticleClik here to view.
Fixing the 2.72 8M Issues
Being frustrated with not being able to run my new DSO with the community software, I thought I would take a look and see if my inner geek still existed. I have made some modifications to try and...
View ArticleNewbie; Sorry regarding getting the correct motor driver
Grove - I2C Motor DriverSKU: ROB72212P seems to be the right driver. (I think)I have a 12V motor and want to control it going forward and back. Toggling a switch goes one way moving toggle switch other...
View ArticleGrove - Serial LCD
Hello,I'm using a 16x2 Grove - Serial LCD v1.1 display attached to an Arduino Uno board. Running the example script the display shows "Hello world!" but the contrast is that dark that it's only visible...
View ArticleGrove - Alcohol Sensor protocol & address
I bought IOIO-OTG, Grove - Base Shield for IOIO-OTG and some sensors. According to the pins decribe mapping to the Grove - Base Shield for IOIO-OTG board:I succesfully run Grove - Gas Sensor(MQ3) (SIG,...
View ArticleGetting the touch shield v1.0 to work
Newbie here.I have downloaded the sketch for v1.0 2.8 TFT from the wiki product page. Every time I try to verify one of the downloaded sketches I get all types of errors in the sketch. Not being a...
View ArticleDSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)
wow!thank you, Pedro!Statistics : Posted by pmos69 • on Fri Mar 02, 2012 8:09 am • Replies 326 • Views 86632
View ArticleClik here to view.
DSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)
Code:v1.10- Improved(/fixed) FFT calculation and display.PedroStatistics : Posted by pmos69 • on Fri Mar 02, 2012 8:09 am • Replies 326 • Views 86632
View ArticleClik here to view.
DSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)
v1.9 released:Quote:v1.9- (crude) FFT spectrum analyzer[/list] (optimized Arm FFT code by Ivan Mellen)------- 256 points[/list]------- channel A------- activate/deactivate with long press in button 1...
View ArticleDSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)
Latest download: https://github.com/pmos69/dso203_gcc/zipball/masterIf you just want the APP, get it here: http://pmos69.net/dso203/APP_G251.hexTested with:- SYS 1.50 1.6 from Marco Sinatti (...
View ArticleDSO203 GCC APP - Community Edition (2.51+SmTech1.8+Fixes)
I was wrong about kilovolts: they appear when FFT screen is on and stay until reset. And I found that file system is being corrupted when device is writing CSV files. With Alterbios 0.1 these are my...
View ArticleAny chance of reviving the DSO201?
Please? I really need help!Statistics : Posted by jsarment2 • on Sun Sep 14, 2014 6:04 am • Replies 1 • Views 51
View ArticleAny chance of reviving the DSO201?
I just made the mistake of buying one of these. I loaded the Ben F firmware and it's not to terrible, but for the the life of me I can't get it to use the 2 G memory card. I've formatted it every way...
View ArticleMusic Shield 2.0. and IRSendRev
Problem solved.First:#define IRpin_PIN PIND //add this#define IRpin 2 //and this in your sketchSecond:ISR(TIMER_INTR_NAME){ //Serial.println(micros()); TIMER_RESET; //uint8_t irdata =...
View Article