Clik here to view.
DSO HW V2.81 working partially only with USB
Hardware: 2.81DFU: V3.40CSYS : Custom 1.69APP : 1.13While working on improvement to the 1.64 SYS, Windows warns me about a peak consumption error on the USB port connected to the DSO Quad. I was not...
View ArticleData recording position moves "unintentional"
Hello,firstly, sorry for my poor english.My DSO203 has a strange behavior when operating without trigger at slow recording speed. The measurement position moves unpredictable every few seconds, as I...
View ArticleSmaller LinkIt ONE for Wearable prototype
I think it is the logical evolution of the Linkit. That is exactly what we are looking for at the moment. Our team would have great interest in a such a product, as long as it has out of the box GSM...
View ArticleSmaller LinkIt ONE for Wearable prototype
Does anybody have interest in the smaller LinkIt ONE? It is still under improvement. if someone have any better ideas , join us!Statistics : Posted by wei.tu • on Mon Jan 05, 2015 1:53 pm • Replies 2 •...
View ArticleClik here to view.
Smaller LinkIt ONE for Wearable prototype
Attachments LinkIt A-Core.jpg (1013.16 KiB) Viewed 83 times Since the launch of [url]LinkIt ONE[/url] on Sept.22th , it got pretty fans all over the world . The all-in-One features make...
View ArticleClik here to view.
LiPo Rider Pro efficiency
Hi,I am using 2 LiPo Rider Pro boards for wireless sensors, powered by solar panels. I am getting quite low efficiencies and according to some simple tests i did, indeed in some conditions only 50% of...
View ArticleProject Sharing_Raspberry Pi Soil Moisture Sensor
Excellent！Statistics : Posted by ellen.tang • on Thu Jan 15, 2015 3:42 pm • Replies 1 • Views 24
View ArticleClik here to view.
Project Sharing_Raspberry Pi Soil Moisture Sensor
This project is designed by jenfoxbot. The Originally published on jenfoxbot's blog and Instructables.com, reproduced with permission. Agriculture consumes between 80 - 90% of all freshwater in the...
View ArticleClik here to view.
Xadow mainboard---infor on address and name for WAKE button
,Can you try like this example ?you can get button state on the serial monitor.// set pin numbers:const int WAKE_Pin = 10; // the number of the pushbutton pin// variables will change:int buttonState =...
View ArticleClik here to view.
GPRS Shield v2.0 AT HTTPSSL Commando
I have been trying to setup a HTTPS connection with my GPRS shield, however I am running in to some problems.Normal unencrypted call through AT+HTTPACTION seem to be working, however when I connect to...
View ArticleMotor Shield V2.0 and Servo
I have the same problem using an IR Receiver on a mega2560. I have moved the IR pin around to avoid using pins 8-13. Every time I activate the IR Pin the motor shield stops, shield led's turn red....
View ArticleClik here to view.
Motor Shield V2.0 and Servo
Hi Everyone,Im trying to control an rc car using a motor shield. This RC car also has a camera mounted on top and is connected to a servo using pin 3. The strange part is, only one or the other work....
View ArticleMotor Shield V2.0 and Servo
Just pay attention to the pins used by Motor shield, many pins have been used by Motor shield, so you can't use it tautologically.Statistics : Posted by mcbrien44 • on Thu Jan 08, 2015 7:50 am •...
View ArticleCan bus shield and Arduino Uno pins
pauldevissers wrote:I have a good working CAN bus shield on the Arduino-Uno, but not anymore if the Arduino is serving a Adafruit VS1053 musicplayer on the SPI bus as well . According to my request to...
View ArticleCan bus shield and Arduino Uno pins
I have a good working CAN bus shield on the Arduino-Uno, but not anymore if the Arduino is serving a Adafruit VS1053 musicplayer on the SPI bus as well . According to my request to Adafruit, it could...
View ArticleCan bus shield and Arduino Uno pins
CAN-bus shield communicates with Arduino through SPI interface, so pin 13, 12, 11, 10 and 2 are occupied. Other pins on Arduino you can still use.Statistics : Posted by anton.i.belov • on Tue Apr 15,...
View ArticleCan bus shield and Arduino Uno pins
May be I understand something wrong but I can't find any information about the communication between Arduino and the CAN-shield. Can I stil use all pins from Arduino Uno (through stackable headers) or...
View ArticleLoNet - GSM/GPRS/GPS Breakout needs a firmware update
Hi there,I've been working for about a week with the LoNet - GSM/GPRS/GPS Breakout. I've managed to add a few GPS functions to the library provided by Seeedstudio.For a few AT commands, the result are...
View ArticleWhy my PC doesn't see the LinkIt ONE?
Yesterday when i upload a code in my linkit one the two red led starts to turn on and off! i disinstall the driver to try to resolve that problem and now the two red led are off. But my pc sees the...
View ArticleProblem with Seeed CAN BUS shield and Arduino Uno R3
I have a brand new Seeed CAN bus shield, which is connected to Arduino Uno R3 (no other shields connected). I am trying to read just anything from my car's OBD2 using the "receive" example code, but I...
View Article