NFC shield V2.0

Hi

I too am getting the same message in the serial console:

Quote:

NDEF Reader
Didn't find PN53x board

I've tried both the included example sketch and the suggested amendments to the sketch here: http://www.seeedstudio.com/wiki/NFC_Shield_V2.0 but aside from changing the baud rate (the example runs at 9600 and the amended runs at 115200) the message in the serial console is the same.

I'm using an Arduino Uno with the NFC Shield V2.0 - SLD01097P, connected directly together using the header pins. I thought perhaps it was voltage related and tried with a 12v supply to the UNO but no change.

Any suggestions?

Many thanks

Statistics : Posted by jenny461388 • on Thu Jul 24, 2014 5:56 pm • Replies 5 • Views 1139

---